How about combining Kannel with Asterisk

Hi,

Unfortunately, we never tried to compile Kannel with Asterisk at all. So we don't have idea if it works on G400P or not.

Original posted by Joe.Yung at 2011-6-20 10:01

Hi,Unfortunately, we never tried to compile Kannel with Asterisk at all. So we don't have idea if it works on G400P or not.

Okay,thank you all the same

Just use your card as 4 GSM modems, yea you loose then a voice capability, but i've done some nice coding (can't share it on GPL sorry) to allow for 'dual action', your G400P is seen in both asterisk and all of AT 'SMS'-related messages go in both directions to pseudo serial port (pty) so, you have both a asterisk voice channel, and GSM SMS gatway, i think that i've described the setup on forum some time ago.

Original posted by krzysioD at 2011-7-31 16:36

Just use your card as 4 GSM modems, yea you loose then a voice capability, but i've done some nice coding (can't share it on GPL sorry) to allow for 'dual action', your G400P is seen in both asterisk ...

Obviously,G400P can provide a voice channel .
I can also used it to send SMS by using the CLI command "gsm send sms" and "gsm send pdu".
Of course , this can not be called a "SMS gateway" because I don't use any AT commands.

So,can you give me some detail setups about how to build a SMS gateway on G400P? I don't find your earlier posts on the forum

doyou want to control the module through AT command? we have a demo in chan-extra.org that show how to send/get at command directly from G400P, which also need dahdi, but need not asterisk.

Original posted by miaolin at 2011-8-5 16:02

doyou want to control the module through AT command? we have a demo in chan-extra.org that show how to send/get at command directly from G400P, which also need dahdi, but need not asterisk.

It's not essential to me,but I'm interested in AT command.